How to Choose an Offshore BIM and Drafting Partner: 15 Questions to Ask Before You Sign
Three proposals land on your desk in the same week. Each promises Revit modeling, CAD drafting, and "rigorous quality control." Each quotes a rate within a few dollars of the others. Each lists the same software. You could flip a coin.
That is the real problem when you compare BIM outsourcing companies. The proposals are written to look alike. The differences show up later, in the third revision cycle, when a sheet comes back with the wrong title block and nobody can say who checked it.
This guide gives you a way to pull those differences into the open before you sign. It covers how to choose an outsourcing partner for BIM and drafting work, with 15 questions grouped by what they test, the red flags that matter, a paid pilot, and a scoring sheet you can copy.
The short answer
Choose the partner that can show, not just state, five things: it fits your scope and software, it has a checkable QA process, it puts security and IP terms in writing, its working hours suit how you review, and its price is tied to defined deliverables. Test all five with a small paid pilot before committing.
Before you shortlist: define scope, LOD, and software
You cannot compare partners until you know what you are asking for. Spend an hour on this first. It will save weeks.
- Scope: Write down the deliverables in plain terms: a Revit model for coordination, a construction document set, as-builts from a scan, a set of shop drawings. One sentence each.
- Level of Development (LOD): LOD describes how much detail and reliability a model element carries. The BIMForum Level of Development Specification, which builds on the AIA's basic LOD definitions, sets out levels from LOD 100 to LOD 400. That includes LOD 350, which its working group developed for coordination between trades.
The specification also does not prescribe which level a project should reach at which point, so your team has to decide. Name the LOD you expect for each element at each milestone. "Fully detailed" is not a spec.
- Software and versions: State your Revit version, your CAD platform, and any other tools in the workflow. A mismatch here causes rework that no price comparison will show.
- File standards: Gather your layer conventions, naming rules, title blocks, and templates. If you work to an information-management standard such as the ISO 19650 series, say so now. If you do not have standards written down, that is worth fixing, because a partner can only follow what you can hand over.
- Review rhythm: Decide who reviews, how often, and how fast you can turn comments.
One more decision belongs here. If you are still deciding whether to outsource at all, start with outsourcing versus in-house. This post assumes you have already decided to outsource and need to pick who.
15 questions to ask, grouped by what they test
Ask all 15 in writing. Written answers are easier to compare and easier to hold a partner to later. Each group has three questions.
How a partner answers matters as much as what it says. A strong answer is specific: it names a stage, a role, a document, or a number of review rounds. A weak answer is a promise with no mechanism behind it. If two partners give the same answer, ask for the evidence. If one partner answers a question you did not ask, notice what it avoided. And if an answer changes between the sales call and the written reply, trust the written one and ask why.
People
- Who will actually do the work, and what are their roles?
You want to know who models, who drafts, who checks, and who manages. A team lead you never meet is a warning.
2. How long has the proposed team worked together, and will it stay on your project?
Rotating staff mid-project resets the learning curve.
3. Can we see a sample set and speak to two references on similar work?
Similar means the same discipline, software, and project type. A polished portfolio of a different kind of work tells you little. Expect named leadership and real backgrounds, the kind of detail on our own team page.
Process and QA
4. What is your QA process, step by step, and who signs off?
Look for named stages, a named checker who is not the author, and a written checklist.
5. How do you handle our CAD and BIM standards?
The best answer describes how standards are loaded into templates before work starts, not "we will follow your standards."
6. What happens when we find an error?
You want a clear correction process, a turnaround expectation, and a way to find the cause so it does not repeat.
Security and IP
7. Will you sign a non-disclosure agreement (NDA) before we share drawings, and what does it cover?
An NDA should be in place before the first file moves.
8. How is our data stored, transferred, and accessed, and what security attestations do you hold?
Two are worth knowing. ISO/IEC 27001 is an international standard for information security management systems, and certification is issued by an accredited certification body. A SOC 2 report comes from a licensed CPA firm and is based on AICPA's Trust Services Criteria, which cover security, availability, processing integrity, confidentiality, and privacy.
Neither is a requirement for a good partner, and neither proves good work. Ask what the partner holds, what it covers, and when it was issued.
9. Who owns the models, drawings, and families when the work is done?
The contract should say that deliverables and any custom content created for you belong to you, with no license-back conditions.
Communication and time zones
10. What are your working hours, and how much of our day do they overlap?
Overlap helps for live coordination. Little overlap can still work well for markup-and-return cycles. Be clear about which your project needs.
11. Who is our single point of contact, and how fast do they respond?
Ask for a response window you can put in writing.
12. How do you handle handoffs, status updates, and file exchange?
Look for a regular update, a shared folder structure, and a clear version rule.
Commercials
13. How is the work priced, and what does the price include?
Defined scope, defined deliverables, and a price you know before work begins is a clean model. Hourly pricing with no cap makes comparison hard. Ask what counts as a change in scope.
14. What does a revision cost?
Know how many review rounds are included and what happens after.
15. How do we scale up, scale down, or stop?
Check minimum terms, notice periods, and what happens to files and knowledge on exit. Compare the answers against the way local hires and outsourced teams compare on delivery so you weigh flexibility fairly.
Red flags
Most red flags are not dramatic. They are small gaps that show up before the contract does.
- Vague QA. "Our quality is our priority" with no stages, checklists, or named checkers.
- No sample set. A partner who cannot or will not show work on a similar project.
- Reluctance on the NDA or IP clause. Delay here is a signal, not a scheduling issue.
- A different team does the work than the one that sold it. Ask who will model and who will check. If the answer shifts, so will your staffing.
- Software answers that dodge versions. "We use Revit" is not an answer. Which version, and what template?
- Price far below the others with no explanation. A low number needs a reason. Check what is excluded.
- No written scope. If the proposal does not list deliverables and acceptance criteria, you will be arguing about them later.
- Pressure to sign before a pilot. A partner confident in its work will welcome a small test.
How to run a paid pilot
A pilot turns promises into evidence. Keep it small, real, and paid.
- Pick a real package. One sheet set, one floor of a model, or one trade. Not a toy example. Not your most critical deadline either.
- Write the brief like a real job. Include drawings, standards, LOD, deadline, and review rules. A weak brief tests your brief, not the partner.
- Run the same pilot with two or three shortlisted partners. Only then can you compare.
- Set the acceptance test first. Decide how you will check the result: against your standards, against a clash check, against the brief.
- Review the process as well as the output. How fast was the first question? Were assumptions flagged? Did the corrections stay fixed?
- Score the result. Use the sheet below, and keep notes on who caught which issue.
When you review the pilot, measure four things:
- Accuracy. How many errors did your check find, and how serious were they?
- Responsiveness. How quickly did the team ask questions or flag gaps in the brief?
- Correction quality. Did the fixes hold in the next round, or did the same issue return?
- Fit with your standards. Could your team open, edit, and issue the files without cleanup?
Because Project Specific Outsourcing works to a defined scope and price, a small first package is a natural way to start any engagement of this type.
A simple scoring sheet
| Category | What to look for | Weight | Partner A | Partner B | Partner C |
|---|---|---|---|---|---|
| Scope and software fit | Matches your discipline, Revit version, and LOD | 20% | |||
| QA and standards | Named stages, independent checker, standards in templates | 25% | |||
| Security and IP | NDA signed, data handling explained, IP ownership clear | 20% | |||
| Communication and hours | Single contact, response window, workable overlap | 15% | |||
| Commercial terms | Defined scope, revision rules, easy exit | 20% | |||
| Weighted total | Sum of score times weight | 100% |
Frequently asked questions
- How do I choose an outsourcing partner for BIM and drafting?
Define scope, LOD, software, and standards first. Ask all partners the same written questions, then run a small paid pilot with your shortlist. Score the results against your own criteria. Choose the partner whose QA, security terms, and communication you could verify, not the lowest quote.
2. What should procurement ask an offshore BIM partner?
Procurement should ask for written answers on team roles, QA stages, NDA and IP terms, data handling, working hours, pricing inclusions, revision rules, and exit terms. Ask for a sample set and two references on similar work. Check any security attestation the partner claims, including what it covers and when it was issued.
3. What are the red flags when comparing offshore BIM outsourcing providers?
The common ones are vague QA, no sample set, resistance to NDA or IP terms, a team that changes after the sale, evasive answers on software versions, an unexplained low price, no written scope, and pressure to sign before a pilot. One red flag deserves a question. Several together deserve a pass.
How ADDMORE answers these questions?
ADDMORE Services is a professional technical services company headquartered in Las Vegas, Nevada, with talent hubs in the Philippines, Latin America, South Africa, India, and Sri Lanka. Our founder, Colin Anthony Addley, is a Chartered Builder, Quantity Surveyor, and Construction Manager with more than 50 years of experience in the industry.
On the BIM and drafting side, our Architectural, BIM, and Rendering services cover 2D drafting and construction documentation, as-built drawings, PDF-to-CAD drafting, architectural, structural, and MEP BIM, scan-to-BIM, CAD-to-Revit conversion, and shop drawings. Work runs under in-house quality control, and our Quality Policy is published on the site. Our advantages of outsourcing BIM post explains the thinking behind how we work.
You do not have to take our word for it. Our case studies include shop drawings and cutting list manhours, quantity takeoff and estimates, and scalable drafting support for a joinery manufacturer. Run the 15 questions above on us as you would on anyone else.
To talk through your shortlist or scope a pilot, book a consultation, email hello@addmoreservices.com, or call (702) 751-3916.
Your turn
Think about the last partner you hired. Which of these 15 questions would have changed your decision, and which one did you wish you had asked sooner?



